De Greaser D-G MSDS

SECTION I

Manufactured by:

CENTRI COATINGS & SYSTEMS CORPORATION

1010 Gentry

North Kansas City, MO 64116

(816) 221-1146

centri@centricoatings.com

Emergency Telephone Number:

(816) 221-1145

Chemical Name & Synonyms:

n/a

Trade Name & Synonyms:

De Greaser D-G

Chemical Family:

Hydrocarbon Mixture

Formula:

Proprietary

SECTION II--HAZARDOUS INGREDIENTS

Pigments - Catalyst - Vehicle - Solvents X Additives X Other -

Hazardous Mixtures of Other Liquids, Solids, or Gases (% and TLV (units))

Aliphatic hydrocarbons, 91%, 300 ppm

Nonionic surfactant, < 3%, unk

Anionic surfactant, 3%, unk

Cationic surfactant, < 3%, unk

SECTION III--PHYSICAL DATA

Boiling Point (deg. F):

310 - 390 degrees F

Vapor Pressure (mm Hg):

unknown

Vapor Density (Air = 1):

Greater than air

Solubility in Water:

Negligible

Specific Gravity (Water = 1):

Less than 1

Percent Volatile by Volume (%):

96 - 97%

Evaporation Rate (Ether = 1):

Slower than ether

Appearance & Odor:

Amber--mild petroleum distillate odor

SECTION IV--FIRE & EXPLOSION HAZARDS

Flash Point and Method:

102 degrees F (TCC)

Flammable Limits/% Volume in Air:

Lower: n/a

Upper: n/a

Extinguishing Media:

Use foam, CO2, or dry chemical fire fighting apparatus.

Special Fire Fighting Procedures & Precautions:

Keep work areas free of ht metal surfaces and other sources of ignition.

Unusual Fire & Explosion Hazards:

The used of self-contained breathing apparatus is recommeded for fire fighters. Water may be unsuitable as an extinguishing media, but helpful in keeping adjacent containers cool. Avoid spreading burning liquid with water used for cooling purposes.

SECTION V--OCCUPATIONAL EXPOSURE LIMITS

OSHA PEL/TWA:

OSHA PEL/CEILING:

ACGIH TLV/TWA:

300 ppm

ACGIH TLV/STEL:

OTHER:

SECTION VI--EMERGENCY & FIRST AID PROCEDURES

Eye Contact:

Wear safety glasses or face shield. This product may be irritating. Flush with water for 15 minutes, holding eyelids open. Get medical attention.

Skin Contact:

The use of impermeable gloves is advised to prevent skin irritation in sensitive individuals. This product may cause skin irritation upon prolonged or repeated contact. If this product comes in contact with skin, wash with soap and large quantities of water.

Inhalation:

The use of respiratory protection depends on vapor concentrations above the time-weighted TLV; use a NIOSH approved cartridge respirator or gas mask. If experiencing breathing difficulties, dizziness, or lightheadedness occur when working in areas with high vapor concentrations, victim should seek air free of vapors. If breathing stops, begin artificial respiration and seek immediate medical attention.

Ingestion:

If this product is swallowed, DO NOT induce vomiting. Seek immediate medical advice and/or attention.

Note to Physician:

Do not induce vomiting.

SECTION VII--REACTIVITY

Stability:

Stable

Hazardous Polymerization:

Will not occur

Conditions & Materials to Avoid:

This product is incompatible with strong oxidizing agents, strong acids or bases and selected amines.

Hazardous Decomposition Products:

Thermal decomposition in the presence of air may yield carbon monoxide and/or carbon dioxide.

SECTION VIII--ENVIRONMENTAL PROTECTION

Spill or Leak Procedures:

Keep sources of ignition and hot metal surfaces isolated from the spill. Flush spilled material into suitable retaining areas or containers with large quantities of water. Small amounts of spilled material may be absorbed into an appropriate absorbant.

SECTION IX--SPECIAL PRECAUTIONS

DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer of Liability

The infomation in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use and disposal of the product are beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is a component in another product, this MSDS information may not be applicable.