EPO-2000 Epoxy Floor Coating
Centri     
Product Data
WARRANTY
The technical data contained herein is accurate  to the best of our knowledge.  Centri Coatings & Systems Corporation warrants that coatings represented herein meet their formulation standards.  No other warranty is expressed or implied, including warranties of merchantability and fitness for a particular purpose.  Published technical data and instructions are subject to change without notice.  Contact your Centri Representative for current technical data and instructions.

EPO-2000 is a two-component epoxy coating designed for those applications that require the high performance characteristics exhibited by epoxy coatings.  

EPO-2000 mixture (A & B) has a short pot life which allows for quick one-coat applications.  It can be used on wood, masonry surfaces, stucco, concrete and others.  Simple to mix and apply.


The physical characteristics of EPO-2000 are:

Appearance (A & B).............................................Various colors  

Weight/Gallon (A)................................................10.5
Weight/Gallon (B)................................................10.5

Viscosity (A + B)..................................................100 - 110 KU

Pot life..................................................................15 minutes

Cure time..............................................................8 to 10 hours (depending on temperature)


Directions:

Add A to B at a 1:1 ratio.  Mix for at least 2 minutes and apply.  Viscosity can be adjusted, after mixing A & B with xylene, if necessary.


Cautions:

Warning!  Flammable!  Harmful if swallowed.  Vapor harmful & explosive.  Keep away from heat, sparks and flame.  No smoking.  Vapor may spread long distances.  Keep container closed.  Do not transfer to bottles or unlabeled containers.  Use with enough ventilation to keep vapor below TLV.  Wear chemical goggles and resistant gloves.  Do not inhale vapors.  Do not take internally.  Do not allow bodily contact.  See the material safety data sheet and your supervisor for information concerning the proper use and safe handling of contents.  IN CASE OF FIRE: Use foam, carbon dioxide, dry chemical, water fog or spray.  FIRST AID: In case of contact, immediately flush eyes and skin with plenty of water for at least 15 minutes.  Call physician.  If swallowed. DO NOT induce vomiting.  Call physician immediately.  If affected by vapors; move to fresh air.  If breathing has stopped, apply artificial respiration, preferably mouth to mouth.  Call physician immediately.  If breathing is difficult, five oxygen.  Call physician.  SPILL OR LEAKS: Eliminate all sources of ignition.  "Small spill": Soak up with absorbent material and scoop into drum.  "Large spill": Dike and pump into drums.  Prevent material from entering drains, sewers or waterways.  Dispose of in accordance with local, state and federal regulations.

KEEP OUT OF REACH OF CHILDREN!           FOR INDUSTRIAL USE ONLY!