Hi Gloss #200   White & Yellow
Centri       
Product Data
WARRANTY
The technical data contained herein is accurate  to the best of our knowledge.  Centri Coatings & Systems Corporation warrants that coatings represented herein meet their formulation standards.  No other warranty is expressed or implied, including warranties of merchantability and fitness for a particular purpose.  Published technical data and instructions are subject to change without notice.  Contact your Centri Representative for current technical data and instructions.

Gloss #200 Traffic Marking Paint is formulated for
high performance, gloss-type applications.  It is a
modified alkyd, solvent-based exterior coating. 
The materials used in the formulation are of the
highest quality and have been evaluated to ensure
optimum coating properties.  Gloss #200 exhibits
excellent adhesion to traffic-bearing surfaces such
as concrete, bituminous pavement and plain or
vitrified brick surfaces.  It has good wear properties and gloss retention.

Preparation:  Clean surface free of dust and loose particles.  If heavy oil is on the surface to be painted, a degreaser should be used to clean the surface for maximum adhesion. Easy to apply with brush, spray or coating machine.

Application: Stir well and, if needed, thin to appropriate viscosity with xylene or toluene at a maximum of 10%.

Coverage:  400 to 500 linear feet (4" wide) per gallon.

Properties:
Total solids, % by weight.......................51.5%, by weight
Pigment, % by weight............................23.5%, by weight
Weight/Gallon, lbs.................................9.78 lbs.
Viscosity, KU........................................80 - 90 KU
Fineness of grind..................................6 minimum
Dry time, no pick up..............................1 - 1.5 hours
Appearance.........................................Yellow or White


Cautions

WARNING! FLAMMABLE -- Contains xylene!  Keep away from heat and open flame and use only with adequate ventilation.  Avoid any prolonged breathing of vapor or spray mist and prolonged or repeated contact with skin. IN CONFINED AREAS: workmen should wear fresh airline respirators to avoid breathing concentrated vapors.  Adequate fresh air must be circulated during application.  Keep container upright to prevent leakage and keep closed when not in use.  In case of spillage, collect and dispose of in accordance with local applicable regulations.  FIRST AID: In case of skin contact, flush with plenty of water. For eyes, flush with plenty of water for 15 minutes and get medical attention. If affected by inhalation of vapor, remove to fresh air. Contact a physician immediately.