pavement marking as well as curbs, center lines and sectional zones. It is specifically applicable for use on tennis courts and asphalt surfaces, since a solvent-based paint would cause "bleed-through".
Preparation: Clean surface free of dust and loose particles. If heavy oil is on the surface to be painted, a degreaser should be used to clean the surface for maximum adhesion. Easy to apply with brush, spray or coating machine.
Brush Application: Stir well and apply as supplied in the can.
Spray and Coating Machines: Stir well and thin to appropriate viscosity with water.
Drying Time: 75 minutes maximum at temperatures of 70 - 80 degrees F.
Coverage: 400 to 500 linear feet (4" wide) per gallon.
Freeze-thaw, 5 cycles...........................
Heat stability, 7 days @ 60 °F.................
Contains lead. May be harmful if eaten. Use only with adequate ventilation. Avoid breathing vapor or spray mist. Avoid contact with skin and eyes. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. DO NOT TAKE INTERNALLY.
KEEP FROM FREEZING!
KEEP OUT OF REACH OF CHILDREN------- FOR INDUSTRIAL USE ONLY!
The technical data contained herein is accurate to the best of our knowledge. Centri Coatings & Systems Corporation warrants that coatings represented herein meet their formulation standards. No other warranty is expressed or implied, including warranties of merchantability and fitness for a particular purpose. Published technical data and instructions are subject to change without notice. Contact your Centri Representative for current technical data and instructions.