Splatter Guard

"The Construction Clean-Up Solution"
Centri      
Product Data
WARRANTY
The technical data contained herein is accurate  to the best of our knowledge.  Centri Coatings & Systems Corporation warrants that coatings represented herein meet their formulation standards.  No other warranty is expressed or implied, including warranties of merchantability and fitness for a particular purpose.  Published technical data and instructions are subject to change without notice.  Contact your Centri Representative for current technical data and instructions.


Splatter Guard has been developed to overcome the difficult and time consuming task of removing concrete, asphalt, paint, and stucco splatter from surrounding or adjacent surfaces during construction or repair jobs.

Splatters require a great deal of time and effort to remove.  Splatter Guard is a liquid gel, which is sprayed on surrounding areas before application or construction begins, thereby protecting the surfaces from permanent adhesion of construction materials and allowing easy clean off by rinsing with water.

Splatter Guard is environmentally safe and will save time and money.  It is a viscous, clear, water-based liquid sprayable gel supplied in various sized containers.


Physical Characteristics:

Appearance.......................clear
Viscosity...........................sprayable gel, very viscous liquid
Density.............................specific gravity: 1.00 to 1.10


Application:

Apply Splatter Guard  from a spray apparatus, completely coating the non-porous surface to be protected.    Splatter Guard will not dry, and will adhere to both vertical and horizontal surfaces, clinging with little sag.  When construction coatings overspray or splatter onto the coated surface, it will not stick.  When the job is complete, simply rinse the area with water.  The splatter will rinse away.  Reapply as needed.

Do not apply to cloth or other porous surfaces.


Cautions:

Splatter Guard is not expected to present any hazardous risk to personnel or water discharged to the sewer system.  High concentrations of mist or prolonged skin contact should be avoided.  Eye and skin protection are recommended, along with spray mask, during application.  Maintain adequate ventilation.  Read the MSDS before using Splatter Guard.

FOR INDUSTRIAL USE ONLY    *    KEEP FROM FREEZING
*  KEEP OUT OF REACH OF CHILDREN  *