The technical data contained herein is accurate to the best of our knowledge. Centri Coatings & Systems Corporation warrants that coatings represented herein meet their formulation standards. No other warranty is expressed or implied, including warranties of merchantability and fitness for a particular purpose. Published technical data and instructions are subject to change without notice. Contact your Centri Representative for current technical data and instructions.
Under Coat AS is a modified rubberized asphaltic coating primarily used to undercoat automotive vehicles, and as a backer coating, where applicable. It has been developed to provide a thick, flexible coating that resists the corrosive nature of road environments, as well as an effective sound buffer from road noise. Under Coat AS is a thick, black, solvent-based product that can be sprayed on vertical or horizontal surfaces with very few drips. It has excellent sag resistance, clings to most surfaces, and cures to a tough film.
Under Coat AS can be brushed on, or sprayed. The area to be coated should be covered thoroughly at a rate of 20 to 25 sq. ft. per gallon. Since there is a tendency to use too much, usage should be monitored for best results without waste.
Clean up with Mineral Spirits or VM&P Naphtha.
·Contains asphalt materials.
·Harmful or fatal, if swallowed.
·Do not induce vomiting.
·Avoid prolonged contact with skin and breathing of vapors.
·Flush skin with water immediately.
·Use adequate ventilation.
·In case of contact with eyes, flush eyes with water and call physician.
FOR INDUSTRIAL USE ONLY * KEEP OUT OF REACH OF CHILDREN