Black Water Base Enamel

WB-1001
Centri       
Product Data
WARRANTY
The technical data contained herein is accurate  to the best of our knowledge.  Centri Coatings & Systems Corporation warrants that coatings represented herein meet their formulation standards.  No other warranty is expressed or implied, including warranties of merchantability and fitness for a particular purpose.  Published technical data and instructions are subject to change without notice.  Contact your Centri Representative for current technical data and instructions.

Our enamels are manufactured using the most recently developed water-based acrylic copolymers on the market.  WB-1001 exhibits fast dry, high gloss and excellent exterior durability.  EASY TO USE.   EASY TO CLEAN UP.


Physical Characteristics:


  Appearance....................Black and White
  Weight Gallon (lbs./gal.)...8.95 - 9.45 lbs./gal.
  Viscosity (#4 Ford cup)....20 - 25 sec., #4 Ford Cup
  (can be changed, if desired)
  Percent solids.................36 - 37 (by weight)
  Thinner..........................Water
  V.O.C............................1.0 lb./gal. max
  Dry Time........................Dry to touch 15 - 30 minutes
  (Depends on temperature and porosity of surface)


Excellent Film Properties


* High Gloss* Hardness* Block Resistance

* Water Soak Resistance* Heat Stability, 1 month @ 126ºF

* Freeze/Thaw Stability---passes 5 cycles





KONIG HARDNESS DEVELOPMENT:

1 hour..........................11
4 hours.........................15
8 hours.........................20
48 hours.......................50
7 days..........................97


KEEP OUT OF REACH OF CHILDREN.  FOR INDUSTRIAL USE ONLY.